7-13
07
Direct Oncoming function
Direct Oncoming function will warn and
control the vehicle depending on the
collision risk level: 'Collision Warning',
'Emergency Braking' and 'Stop vehicle
and end brake control'.
OJWEV071001LOJWEV071001L
Collision Warning
• To warn the driver of a collision, the
warning light will blink and the
'Collision Warning' warning message
will appear on the cluster, an audible
warning will sound and the steering
wheel will vibrate.
The function will operate when your
vehicle speed is between approximately
30-130 km/h (19-80 mph) and the
oncoming vehicle or powered two-
wheeler speed is approximately above 10
km/h (6 mph)
OJWEV071002LOJWEV071002L
• To warn the driver that emergency
braking will be assisted, the
warning light will blink and the
'Emergency Braking' warning message
will appear on the cluster, an audible
warning will sound and the steering
wheel will vibrate.
•
In emergency braking situation,
braking is assisted with strong braking
power by the function to help prevent
collision with the oncoming vehicle.
•
The function will operate when
your vehicle speed is between
approximately 30-130 km/h (19-80
mph) and the oncoming vehicle
or powered two-wheeler speed is
approximately above 10 km/h (6 mph).
To Next Page
Loading...
