7-42
Driver assistance system
OTM070097NOTM070097N
When the vehicle is restarted with
Blind-Spot Collision-Avoidance Assist
off, the ‘Blind-Spot Safety System is Off’
message will appear on the instrument
cluster.
If you select 'Blind-Spot Safety', warning
light on the outside rearview mirror will
blink for three seconds. In addition, if the
vehicle is turned on, when 'Blind-Spot
Safety' is selected, the warning light on
the outside rearview mirror blinks for
three seconds.
a warning message appears on the
function resumes after the trailer
Information
If the vehicle is restarted, Blind-Spot
Collision-Avoidance Assist will maintain
the last setting.
Type AType A
OJWEV073186LOJWEV073186L
Type BType B
OJWEV073441LOJWEV073441L
Warning Methods
Warning Method can be set when the
vehicle is in ON position.
•
Warning Volume: Select ‘Setup →
Vehicle → Driver Assistance → Warning
Methods → Warning Volume’ on the
infotainment system, and adjust the
warning volume.
•
Haptic Warning: Select ‘Setup →
Vehicle → Driver Assistance → Warning
Methods → Haptic Warning’ on the
infotainment system, and set or adjust
the steering wheel vibration warning.
•
Driving Safety Priority: Select ‘Setup →
Vehicle → Driver Assistance → Warning
Methods → Driving Safety Priority’ on
the infotainment system, the audio
volume is reduced while a warning
sounds.
To Next Page
Loading...
