7-71
07
Information
• If speed limit information of the road
cannot be recognized, '---' sign will be
displayed. Please refer to "Limitations
of Intelligent Speed Limit Assist" if the
road signs are difficult to recognize.
•
Intelligent Speed Limit Assist provides
additional road sign information in
addition to speed limit. The additional
road sign information provided may
vary according to your country.
•
Supplementary sign displayed under
the speed limit or overtaking restriction
sign means the conditions under which
the signs must be followed. If the
supplementary sign is not recognized, it
is displayed as blank.
•
The images and colors in the cluster
may differ depending on the cluster
type or theme selected from the cluster.
OJWEV071250LOJWEV071250L
Warning overspeed
When driving at a speed higher than the
displayed speed limit, the red speed limit
indicator will blink and warning sounds.
OJWEV073499LOJWEV073499L OJWEV073500LOJWEV073500L
Changing set speed
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or – switch on the steering wheel.
OJWEV073476LOJWEV073476L
Set Speed Auto Change (Navigation
equipped)
Manual Speed Limit Assist or Smart
Cruise Control assists the vehicle to
adjust its speed according to the speed
limit. When the cruising speed is set
as same as the speed limit, the vehicle
automatically adjusts its speed if the
speed limit changes. The function
operates on the road which has a speed
limit of 70 km/h (45 mph) or higher.
When the function is active, the cruising
speed on the instrument cluster appears
in green.
To Next Page
Loading...
