Genesis GV60 - Page 566

7-139
07
Information
When the gear is in R (Reverse), the
rear view does not turn off even if the
infotainment system button (3) is pressed.
Rear View while driving
The driver can check the rear view on
the screen while driving. The rear view
while driving consist of a rear view
while driving and a rear wide view while
driving. Also, you can change the view
mode you want to select by pressing
the view button (2) on the infotainment
system screen.
Rear View while driving function will turn
on under the following conditions:
•
The Parking/View button (1) is
pressed, while driving above 10 km/h
(6 mph).
•
is selected among the view buttons
(2) when vehicle speed is 10 km/h (6
mph) or less.
Rear Vie
w while driving function will turn
off under the following conditions:
• The Parking/View button (1) or the
infotainment system button (1) is
pressed.
•
The gear is shifted to P (Park).
•
The Parking/View button (1) is
pressed.
• The Home button (4) is pressed.
•
Other view modes are selected when
vehicle speed is 10 km/h (6 mph) or
less.
3D view
The 3D view shows the image around the
vehicle from various angles.
You can change angles by tapping the
screen. Press the 3D View button again
to return to the initial angle.
3D view will turn on when the 3D view
is selected among the view buttons (2)
under the following conditions:
•
The gear is in P (Park), N (Neutral) or D
(Drive) when vehicle speed is below 10
km/h (6 mph).
•
The Surround View Monitor is turned
on when the gear is in R (Reverse).
When the gear is in P (Park), N (Neutral)
or D (Drive), 3D view will turn off under
the following conditions:
•
The gear is shifted to P (Park).
•
The Parking/View button (1) is
pressed.
•
The infotainment system button (3) is
pressed.
•
The Home button (4) is pressed.
•
Vehicle speed is above 10 km/h (6
mph).
Information
3D view does not display guidelines.