Part No. 40462 DPL-25S • DPL-30S • DPL-35S Super Series 4 - 1
September 2016 Section 4 - Scheduled Maintenance Procedures
About This Section
This section contains detailed procedures for each
scheduled maintenance inspection.
Each procedure includes a description, safety
warnings and step-by-step instructions.
Symbols Legend
Indicates the presence of a hazard
that will cause death or serious
injury.
Indicates the presence of a hazard
that may cause death or serious
injury.
Indicates the presence of a hazard
that will or may cause serious
injury or damage to the machine.
Indicates special operation or
maintenance information.
Indicates that a specific result is expected after
performing a series of steps.
Observe and Obey:
Maintenance inspections shall be completed by
a person trained and qualified on the
maintenance of these machines.
Scheduled maintenance inspections shall be
completed daily, frequently (every 3 months),
and annually as specified on the maintenance
report.
Failure to properly complete each
inspection when required may
result in death, serious injury or
substantial machine damage.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating machine.
Keep records on all inspections for three years.
Scheduled Maintenance Procedures
To Next Page
Loading...
Need help?
General
