Genie GR-12 Service Manual

May 2018 Service Manual
Introduction
Part No. 1275811GT GR
™
• QS
™
R • QS
™
W iii
Revision History
Revision Date Section Procedure / Page / Description
A 9/2016 Initial release
A1 2/2018 Repair 14-1 How to Remove the Batteries
A2 5/2018 Schematics
Add serial break GRR-101 to electrical and hydraulic
schematics
Reference Examples:
Section – Maintenance, B-3
Electronic Version
Click on any content or procedure in the Table of Contents to view
the update.
Section – Repair Procedure, 4-2
Section – Fault Codes, All charts
Section – Schematics, Legends and schematics

Genie GR-12 Specifications

General

Machine Width	1.2 m
Machine Length	2.44 m
Machine Height	2.54 m
Power Source	Electric
Stowed Height	2.54 m
Drive Speed - Lowered	4.8 km/h
Turning Radius (Inside)	2.44 m
Platform Width	1.12 m
Tire Type	Non-marking
Travel Speed	4.8 km/h
Ground Clearance	0.1 m
Overall Length	2.44 m
Overall Width	1.2 m
Overall Height	2.54 m