GeoMax ZOOM 10 - Page 102

Total Station Manual
101
ƻ
2 After finishing the
pre-settings (know
more details at the
beginning of chapter
5), press [F4] to start
Area app.
[F4]
or
[4]
ƻ
3 There are four
ways to get target
point for Area
calculation.
A: Input the name of
target point in“Pt.”
field and input prism
height in “T.H.” field
in [Area] screen, then
aim the prism and
press [F1] (ALL) or
[F1] (DIST) + [F2]
(REC) to measuring
and saving the target
point for area
calculation.
Input point
name and
prism
height
+
[F1]
or
[F1]
+
[F2]
A: Get the target point by measure.
B: Press [F4] twice
then press [F1](List)
in [Area] screen, use
the key [▲]\[▼]to
select the point in the
point list for traverse
calculation, then press
[F4](OK) to be
selected.
[F4]
+
[F4]
+
[F1](List)
+
[F4](OK)
B: Select the point by list in the memery.
C: Input the name of
known point and
press [F3](Find) to
find whether the point
Input name
+
[F3](Find)
+
C: Input the name of the point and find
whether it is in memory.