GeoMax ZOOM 10 - Page 103

Total Station Manual
102
is in memory, if exist,
then press [F4](OK)
to be selected for
calculating; if not
exist, then need to
input or measure the
point.
[F4](OK)
D: Press [F2]
(Coord.) to input a
point that not exist in
memory.
[F2](Coord.
)
+
Input
Coord.
+
[F4](OK)
D: Input the point through keyboard.
ƻ
4 Set other target
point as described
above four ways.
The area result will be
calculated and
showed at “Area”
field automatically
when there are more
than 3 target points be
set in application.
ƻ
5
Press [F4] twice,
then press [F3] (Dec
PT) to undo selection
or measurement of
the previous point.
[F4]
+
[F4]
+
[F3](Dec
PT)