GeoMax ZOOM 10 - Page 96

Total Station Manual
95
ƻ
2 After finishing setting
job, station and orientation,
press [F4] in the Pre-Setting
menu to go to Select Tie
Distance Mode screen.
[F4]
ƻ
3 Press [F1] to select the
Polygonal tie distance.
[F1]
ƻ
4 Start to measure the first
target point. Aim at the first
target point and press
[F1](ALL) or [F2](DIST) +
[F3](REC) to finishing
measurement.
Ć
1
PAGE1
Press
[F1]
or
[F2] +
[F3]