Administrator Mode
63
4 4
Note: To enable Smart Streaming supported only by GV-BX12201
firmware V1.02 or later, it is required to use either GV-NVR V8.7 or GV-
VMS V16.10.
[Region of Interest] Note this function is disabled by default and is not
supported by GV-BX2600 and Target Series. Sets ROI (clarity) to
specified regions on the live view for standalone GV-IP Cameras, GV-IP
Cameras connecting to GV-System / GV-VMS or third-party software
through ONVIF/RTSP. A total of 5 ROI can be set. This function is disabled
by default.
Select Enable and click ROI Setting to configure:
1. On the popup window, use your mouse and draw directly on the live
view to specify a region.
Figure 4-3
2. To set up a region with enhanced clarity, select ROI, select High,
Medium or Low using the drop-down list and then drag on the
image to outline a region.
3. Click Apply to apply the configurations.
[GOP Structure and Length] Set the maximum number of seconds
between every key frame.
To Next Page
Loading...
Need help?
General
