Administrator Mode
65
4 4
Record Profile: Note this function is only available for firmware V2.14
or later. This setting is only applicable for recording to the camera’s
memory card. Select Performance to maximize the lifespan of the
memory card by restricting the maximum bit rate to 4 Mbit and
Sharpness value to 30. Select Quality to adopt your current settings.
Record audio: Activates audio recording when an event occurs.
Write recording data into local storage: Select this function for
uninterrupted recording to the memory card while the live view is
accessed through the Web interface or other applications. This option
is enabled by default.
IMPORTANT: To ensure the quality of simultaneous recording and live
view access, make sure you connect no more than two connections to
the camera using Web interface or any other applications.
[Text Overlay Settings] Displays camera name, date, and/or time on the
live view and recorded videos when viewing through GeoVision software.
Camera Name: Type the camera name.
Overlay with: Select one or more of the options below to be overlaid
on the live view and recorded videos.
Camera Name
Date
System Time
Name of the Associated Digital Input: Note this option is only
supported by cameras with I/O function.
[Text Overlay Settings (OSD)] Note this function is not supported by GV-
BX2600.
To Next Page
Loading...
Need help?
General
