66
Displays camera name, date, and/or time on the live view and recorded
videos when viewing through GeoVision software and third-party software
through ONVIF and RTSP.
Name: Type the camera name.
Font Size: Select the font size using the drop-down list.
Overlay with: Select one or more of the options below to be overlaid
on the live view and recorded videos. Use the drop-down list to select
the display position.
Camera Name
Date
System Time
[Watermark Setting] Note this function is not supported for Target Series.
Enable this option to watermark all recordings. The watermark allows you
to verify whether the video has been tampered while it was recorded. See
6.4 Verifying Watermark.
[Audio In Source] Note this function is only available in GV-PTZ010D
which contain a built-in microphone and also allow you to install an external
microphone.
Built-in Microphone: Enable the built-in microphone to record
sounds. By default the option is enabled.
External Microphone: Enable the externally connected microphone
to record sounds.
[TV Out] Note this function is only available for the camera with TV-out
connector. Select the signal format of the Video Output on the camera as
either NTSC or PAL.
To Next Page
Loading...
Need help?
General
