Troubleshooting 8-7
z Make sure that your tablet PC is configured with the same security
option (encryption) to the Access Point.
z Use the Web Manager/Telnet of the Access Point to check whether it
is connected to the network.
z Reconfigure and reset the Access Point.
I cannot access the network.
z Make sure that the network configuration is appropriate.
z Make sure that the user name or password is correct.
z You have moved out of range of the network.
z Turn off power management.
PC Card Problems (Optional)
The PC card does not work.
z Make sure that the PC card is correctly seated.
z If the card requires an IRQ (Interrupt ReQuest), make sure that there
is one available.
The PC card stops communicating properly.
z The application may have been reset when the tablet PC is turned
off or in Standby/Sleep mode. Exit and restart the application.
Power Management Problems
The tablet PC does not enter Standby or Hibernation mode automatically.
z If you have a connection to another computer, the tablet PC does
not enter Standby or Hibernation mode if the connection is actively in
use.
z Make sure that the Standby or Hibernation time-out is enabled.
To Next Page
Loading...
