Managing Power 3-7
5. Fit another battery pack into place.
6. Replace the battery cover and turn the latch clockwise to the lock
position.
Battery Low Signals and Actions
Battery Low occurs when the battery has approximately 10% (Windows
default setting) of its charge remaining. The tablet PC’s Battery Charge
Indicator (
) blinks red to alert you to take actions.
NOTE: You can set up your threshold and signals of Battery Low under Windows.
Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the tablet PC. If you are using the
audio sub-
system, hard or USB flash disk, the battery might run out of charge very
quickly.
Always respond to Battery Low by placing your tablet PC on the Standby
or Hibernation mode, turning off the tablet PC, or connecting the AC
adapter. If you do not take any action, the tablet PC will automatically
hibernate and turn off.
To Next Page
Loading...
Need help?
General
