5-8
Using BIOS Setup and System Recovery
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
The bootable devices will be automatically detected during POST and
shown here, allowing you to set the sequence that the BIOS uses to look for
a device from which to load the OS. Below is a brief description of
keyboard usage:
Key Function
↑ , ↓ Selects (highlight) a boot device.
1 to 4 Loads the default boot sequence.
NOTE: You can press the f, r, x, –/+, and Shift + 1 keys by connecting a USB
keyboard to your tablet PC. Make sure that the item “Legacy USB Support” under
the Main menu is set at Enabled (default).
To Next Page
Loading...
Need help?
General
