5-10
Using BIOS Setup and System Recovery
System Recovery
You need to run System Recovery when:
z Your Windows operating system does not start at all.
z You want to restore the factory default Windows settings.
WARNING: Using this feature will reinstall Windows to your system and configure it to the
system’s factory default settings. All data on the hard disk drive will be lost.
To run System Recovery:
1. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds or press Ent and select HDI Recovery when a
small window appears on the screen.
2. The message
This will help you reinstall Windows to the whole HDD
to factory default. All data on HDD will be lost
appears on the
To Next Page
Loading...
