getAir SmartFan - Required Tools

10 SmartFan EN
3.4 Dimensions
3.5 Required tools
The following equipment is needed to install the SmartFan:
•CoredrillwithaØ162mmbit
•Sabresawforsawingplastic
•Mountingadhesive/sealanttoxthemountingtubeinplace
•2.5mmslotscrewdriver
•Hammerandchiselforcableducts/slits
•Deeppattressboxforushmounting
(single or double, dependent on the choice of installation)
198
45
199
>360
500
160
3
500
162
240
220