getAir SmartFan - General Remarks

Though its contents have been checked for consistency with the described hard- and soft-
ware, deviations cannot be ruled out, meaning that no guarantee of complete consistency
can be given.
This documentation is updated on a regular basis. Necessary corrections and useful ad-
denda will always be included in subsequent versions.
They are also available at www.getair.eu.
4 SmartFan EN
1 General remarks
1.1 Usage
The SmartFan is intended for use in the controlled ventilation of rooms in houses, apart-
ments,hotels, ofceandpublicbuildings.It canbeinstalledeitherin newbuildingsorin
existing buildings undergoing refurbishment and/or modernisation. SmartFan usage is
authorised solely in accordance with the described use cases and only in association with
components recommended by getAir GmbH & Co. KG and listed in this document. Other
SmartFan usages are not permitted. The system is unsuitable for extracting smoke or drying
buildings, for rooms containing aggressive and/or caustic gases or extreme levels of dust.
To guarantee the fault-free and safe use of the system, it is vital to ensure appropriate trans-
port and storage, professional planning and installation, as well as proper operation and
maintenance.Modicationsandrecongurationsoftheunit/systemarenotpermitted.
Before starting installation, the project needs to have been planned properly, detailing the
number and positioning of the ventilation units and their associated controls, and the venti-
lation principle applied (cross-ventilation, single room ventilation, air extraction).
Duringplanning,installationandoperation,allrelevantrequirements,buildingandreprotec-
tion regulations and accident prevention regulations are to be complied with. In the planning
phase, details need to be checked with the respective chimney sweep or ventilation expert.