getAir SmartFan - Safety Information

5
EN SmartFan
1.2 Safety information
Attention is to be paid to the safety information contained in these instructions for instal-
ling and operating the control unit. Before any work is carried out on the unit / system, the
instructions and safety information are to be read carefully in full. Non-compliance with
the safety information can lead to harm/damage to persons and/or equipment.
Assembly, electrical installation and system start-up should only be performed by skilled
persons.Thesearepeoplewithrelevantsafetytrainingandqualiedtoinstall,commission
and label equipment, systems and cabling in accordance with current safety standards.
The following list contains descriptions of the symbols and terms used in these instructions:
Hazard symbol
Caution
This hazard symbol warns about
the danger of injury.
Electricity
This hazard symbol warns about
the danger of electrocution.
Warning symbol
Please note
This warning symbol indicates
important information.