What to do if my getAir SmartFan Fan is not working?
If your getAir Fan isn't working, here are a few things to check: * First, make sure it's getting power. * Second, check the fan connector, DIP switch position, zone setting and cables, as there may be an installation or maintenance fault. * If these steps don't solve the issue, the fan, control unit, or power supply unit might be faulty and need replacement.
Why is the air flow rate so low in my getAir SmartFan Fan?
A low air flow rate in your getAir Fan could be due to several reasons: * The inside cover might be closed, so make sure it's open. * The filter could be dirty, requiring cleaning or replacement. * The heat exchanger might be dirty, so clean the heat exchanger and ventilation system.
Important safety instructions and symbols used in the manual for installation and operation.
Explains how the SmartFan system operates, including airflow direction and heat recovery.
Lists and illustrates all components included in the SmartFan set.
Lists all necessary tools for installing the SmartFan unit.
Specifies minimum distances for optimal positioning and function of the SmartFan.
Guidance on installing control units and power supply safely.
Details on how to connect and wire the SmartFan units and control units.
Instructions on how to configure the DIP switches on the fan unit for zone and direction.
Instructions on preparing the wall by making a hole for installation.
Steps for inserting and sealing the mounting tube into the prepared wall hole.
Explanation of various operating modes like Eco, Full-blast, Sleep, and other functions.
Table detailing components, maintenance intervals, and tasks.
General safety precautions for maintenance and detailed filter maintenance steps.
Step-by-step guide for cleaning and replacing dust and pollen filters.
Addresses common problems like fan direction, functioning, control unit issues, and noise.
Conditions, duration, and exclusions of the SmartFan warranty.
To Next Page
General