How to fix a getAir SmartFan that does not change direction?
If your getAir Fan unit does not change direction, it might be due to the control unit operating in "full-blast" mode. Try setting the controls to eco-mode (heat recovery). If the problem continues, the fan unit or the control unit/power supply may need to be replaced.
Important safety instructions and symbols used in the manual for installation and operation.
Explains how the SmartFan system operates, including airflow direction and heat recovery.
Lists and illustrates all components included in the SmartFan set.
Lists all necessary tools for installing the SmartFan unit.
Specifies minimum distances for optimal positioning and function of the SmartFan.
Guidance on installing control units and power supply safely.
Details on how to connect and wire the SmartFan units and control units.
Instructions on how to configure the DIP switches on the fan unit for zone and direction.
Instructions on preparing the wall by making a hole for installation.
Steps for inserting and sealing the mounting tube into the prepared wall hole.
Explanation of various operating modes like Eco, Full-blast, Sleep, and other functions.
Table detailing components, maintenance intervals, and tasks.
General safety precautions for maintenance and detailed filter maintenance steps.
Step-by-step guide for cleaning and replacing dust and pollen filters.
Addresses common problems like fan direction, functioning, control unit issues, and noise.
Conditions, duration, and exclusions of the SmartFan warranty.
To Next Page
General