getAir SmartFan - Page 44

12.2 Liability
The system has been developed and manufactured for the decentralised ventilation of
homes and functional premises.
Any other usage is considered to be improper and can cause damage to the SmartFan
or to persons. In such a case, the manufacturer cannot be held liable. The manufacturer
cannot be held liable for any damage resulting from one of the following causes:
• whenthesafety,operatingandmaintenanceinstructionscontainedinthisdocu
 menthavenotbeenfollowed;
• whentheinstallationwasnotperformedcorrectly;
• whennon-originalreplacementparts(notapprovedbythemanufacturer)
 areinstalled;
• whenthefaults/defectsaretheresultoffaultyinstallation,improper/incorrect
 useordirt;
• Normalwearandtear.
12.3 Complaints
Please check the contents of the delivered material in accordance with the delivery note.
Also check for any transport damage. Report any missing items to your supplier within
four weeks of delivery.
12.4 Documentation
Theabovedocumentationdescribesthefunctionality ofthestandardconguration.To
maintain clarity, we are unable to take account of every possible installation, operating or
maintenanceconguration.Thediagramsinthisdocumentationmaydeviateslightlyfrom
the design of the product you have purchased. Even when this is the case, the functions
basically remain the same.
12.5 Service
For technical advice, please contact your supplier, dealer or our service staff.
44 SmartFan EN