<Doc_TEC><Doc_503712400><Rel_B><Lang_EN>
Page 10 av 64
The programs
Programs, standard set:
P1 Economy program for lightly soiled items.
P2 Normal program for normally soiled items.
P3 Intensive program for heavily soiled goods.
The following programs can also be selected:
P4 Normal program with detergent dosing (option).
P5 Intensive program with detergent dosing (option).
P6 Normal program with detergent dosing in tank and/or spray dosing in the chamber
(option).
P7 Intensive program with detergent dosing and/or spray dosing in the chamber (option).
P8 Rim ushing program.
P10 Extra intensive program to meet the requirements of HTM 2030 (option).
P11 Extra intensive program with detergent dosing in tank, to meet the requirements of
HTM 2030 (option).
P12 Extra intensive program with detergent dosing in tank and/or spray dosing in the
chamber, to meet the requirements of HTM 2030 (option).
P14 Extra Extra intensive program to meet the requirements of Koller W and HTM 2030.
P15 Extra Extra intensive program with detergent dosing in tank or pump, to meet the
requirements of Koller W and HTM 2030 (option).
P16 Extra Extra intensive program with detergent dosing in tank and/or spray dosing in
the chamber, to meet the requirements of Koller W and HTM 2030 (option).
P18 Cooling phase with combined rinse-aid and descaler dosing in tank (option).
P19 Cooling phase with rinse-aid dosing in pump (option).
P20 Cooling phase with rinse-aid dosing in tank.
The process starts when the desired program is chosen (the yellow button by L L lights
up). (The normal program takes about ve minutes.)
When the process is complete, the green lamp at M M lights up and the door can be
opened (manual door).
Machine with automatic door opens when the IR diode,
, is activated for at least
1 second.
The items may be hot at the end of the program. If the temperature of the
items is above 60 °C, the display shows U7.
To Next Page
Loading...
