<Doc_TEC><Doc_503712400><Rel_B><Lang_EN>
Page 4 av 64
PREFACE
This technical manual is intended for maintenance and service personnel working with
the Tornado/FD1800 usher disinfector.
The service manual is divided into the following sections:
• Safety regulations
• Technical data
• Description of the design and operation of the machine
• Software description and menu tree
• Preventive maintenance
• Fault indications and troubleshooting
• Repair and adjustments
• Electrical diagram
The purpose of the technical manual is to provide information for the maintenance and
service personnel whose job it is to ensure safe operation with optimum efciency.
Before starting work on the machine, the maintenance and service personnel must have
read the safety instructions in this manual and familiarized themselves with the operation
of the machine and its safety instructions.
Read the safety instructions in the technical manual before starting work on
the machine.
The information in this manual describes the machine as dispatched from Getinge.
There may be differences due to customization.
The machine is accompanied by the following documentation:
• User manual
• Installation manual
• Technical manual (this manual)
• Spare parts list
Getinge reserves the right to change the specication and design without prior notice.
The information in this manual was up to date on the date of issue of the manual.
© Copyright
The content of this manual must not be copied, in whole or in part,
without the written consent of Getinge.
To Next Page
Loading...
Need help?
General
