<Doc_TEC><Doc_503712400><Rel_B><Lang_EN>
Page 6 av 64
INTRODUCTION
Intended use of the machine
Flusher disinfector for emptying, cleaning and disinfecting bowls, urine bottles and
buckets.
To meet the requirements of EN ISO 15883, the items must be placed in the proper
holder, recommended by Getinge Disinfection AB.
The customer is responsible for ensuring that an Installation Qualication and a
Performance Qualication according to ISO 15883 are carried out before the product is
put into use.
Attention symbols
Some of the warnings, instructions and advice in this manual are so important that we
use the following special symbols to draw attention to them. The symbols and designs
used are:
This symbol indicates a warning in the technical manual. It warns of a hazard
that may lead to more or less severe injury and in certain cases mortal
danger.
It also highlights warnings of possible damage to the machine.
This symbol highlights a warning in the text of the service manual dealing
with the handling of components sensitive to ESD. The hazard that it warns
about may result in damage to hardware and/or circuit boards.
If the machine has not been used for 72 hours, the steam generators and
circulation pump must be drained. This must only be done by authorized
service personnel.
Warning, hot surfaces. When the processor is finished, the surfaces can be
very hot. Be careful when touching surfaces.
Warning: electrically live parts
Contamination risk
Service personnel can be infected by parts in the machine.
RCD
We recommend using a residual current device (RCD) with the machine.
To Next Page
Loading...
Need help?
General
