Getinge FD1800 - Page 27

Page 27 av 64
<Doc_TEC><Doc_503712400><Rel_B><Lang_EN>
Contact Getinge Disinfection for further information about these programs. Each sub-
line number corresponds to a button or a combination of buttons. Choose programs and
program names for the buttons, based on the equipment of the machine.
The sub-line numbers are as follows:
11 = Program selection button
(normally programmed 1. Economy program here).
12 = Program name button
.
21 = Program selection button
(normally programmed 2. Normal program here).
22 = Program name button
.
31 = Program selection buttons
and pressed simultaneously (normally
programmed 4. Normal program + process agent here).
32 = Program name buttons and pressed together.
41 = Program selection button
(normally programmed 3. Intensive program here).
42 = Program selection button
.
51 = Program selection buttons
and pressed together (normally programmed 5.
Intensive program + process agent here).
52 = Program name buttons
and pressed together.
61 = Program selection buttons
(normally programmed 8. Rim ushing here).
62 = Program name button
.
71 = Program selection for pedal
72 = Name the program for the pedal
81 = Program selection for pedal + button 5
82 = Program name for pedal + button 5
91 = Program selection IR
92 = Program name IR
101 = Program selection IR + button 5
102 = Program name IR + button 5
150 = IR function