Page 33 av 64
<Doc_TEC><Doc_503712400><Rel_B><Lang_EN>
Type of rim flushing
Line 53:01 Authorization level: CD
Specify whether rim ushing will take place.
00 = No rim ushing
01 = Rim ushing in the machine
Addition of softened water
Line 54 Authorization level: CD
Specify whether soft water is to be added and if so where. The time for which the water
will be added is specied at line 55.
00 = No soft water is to be added.
01 = Soft water is to be added in the tank.
02 = Soft water is to be added in the steam generator.
Time for soft water
Line 55 Authorization level: CD
Length of time for which soft water is to be added if the answer to line 54 was 01 or 02.
00 - 99 seconds in one-second steps.
Flushing time, cooling (internal)
Line 56 Authorization level: CD
The cooling phase ushes for 4 seconds. If more cooling is required, the time can be
extended by 0.0 – 99.9 seconds.
Pump time (flushing time) in the instruction “Pulse flushing to level”
Line 57, sub-line 01 Authorization level: CD
0.0 - 9.9 seconds in 0.1-second steps.
Pause time in the instruction “Pulse flushing to level”
Line 57, sub-line 02 Authorization level: CD
0.0 - 9.9 seconds in 0.1-second steps.
Pulses in the instruction “Pulse flushing to level”
Line 57, sub-line 03 Authorization level: CD
0.0 - 9.9 seconds in 0.1-second steps.
To Next Page
Loading...
Need help?
General
