Page 4
SAFETY DIRECTIONS
Installation and commissioning are to be performed by skilled personnel only.
Only trained electrical craftsmen are permitted to work on electrical equipment. They must
assess the tasks assigned to them, recognise potential danger zones and be able to take
appropriate safety measures.
Installation work is only to be carried out with the supply o.
Observe the applicable regulations and standards.
Coverings and protective devices
Only operate with corresponding coverings and protective devices.
Ensure that gaskets are tted correctly and that cable glands are correctly tightened.
Spare parts
Only use original spare parts.
Specied use
The door control is intended for a power-operated door with a drive unit (GfA limit switch
systems).
The safe operation is only guaranteed with specied normal use. The drive unit is to be
protected from rain, moisture and aggressive ambient conditions. No liability for damage
caused by other applications or non-observance of the information in the manual.
Modications are only permitted with the agreement of the manufacturer. Otherwise the
Declaration of Incorporation shall be rendered null and void.
Safety information
WARNING! Failure to follow these installation instructions may result
in severe injury or death.
- Please read these instructions before using the product
- Keep these instructions handy
- Please include these instructions when you pass on the product