Page 48
DECLARATION OF INCORPORATION
within the meaning of Machinery Directive 2006/42/EC
for partly completed machinery, Appendix II Part B
Declaration of conformity
within the meaning of EMC Directive 2014/30/EU
within the meaning of RoHS Directive 2011/65/EU
We, the
GfA ELEKTROMATEN GmbH & Co. KG
declare under our sole responsibility that the
following product complies with the above
directives and is only intended for installation
in a door system.
Door control
TS 981
(Part no.: 20098100)
We undertake to transmit in response to a re-
asoned request by the appropriate regulatory
authorities the special documents on the partly
completed machinery.
This product must only be put into operation
when it has been determined that the com-
plete machine/system in which it has been
installed complies with the provisions of the
above-mentioned directives.
Authorised representative to compile the tech-
nical documents is the undersigned.
Düsseldorf, 10.08.2018
Stephan Kleine
CEO
Signature
The following requirements from Appendix I of
the Machinery Directive 2006/42/EC are met:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4.2,
1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.9,
1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8,
1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.6.1, 1.6.2,
1.6.4, 1.7.1.1, 1.7.1.2, 1.7.2, 1.7.3, 1.7.4.3.
Standards applied:
EN 12453:2001
Industrial, commercial and garage doors and
gates - Safety in use of power operated doors -
Requirements and test methods
EN 12978:2003+A1:2009
Industrial, commercial and garage doors and
gates - Safety devices for power operated doors
and gates - Requirements and test methods
EN 60335-1:2012
Household and similar electrical appliances -
Safety - Part 1: General requirements
EN 61000-6-2:2005
Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards - Immunity
standard for industrial environments
EN 61000-6-3:2007
Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards - Emission
standard for residential, commercial and light-
industrial environments