Giant NEOSTRACK - Start Reminder

Other Location Altitude
1. In the Setup menu, press to select
Altitude > Location 1, Location 2,
Location 3, Location 4, Location 5
and press .
2. To set the altitude, press
to select
Altitude and press
3. Press / to adjust the desired altitude
and press setting.
4. To calibrate the set altitude, press to
select Calibrate ot sserp dna
5. Press
to exit this menu.
Location 1
Altitude
10m
Calibrate
ENGLISH
Start Reminder
When Neostrack detects motion of your bike, a reminder pops up to ask you if
you would like to record or not. You can set the frequency of the start reminder.
1. In the Setup menu, press to select
System > Start Reminder and press .
2.
Press to enter its submenu and press
to adjust the desired setting and press
/
3. Press
to exit this menu.
Start reminder
Once
27