ENGLISH
Step 4: Acquire Satellite Signals
Once the Neostrack is turned on, it will automatically search for satellite signals. It may take
30 to 60 seconds to acquire signals. Please make sure you acquire the satellite signal for the
The GPS signal icon (
/
• icon appears on the screen.
•
Tunnels Inside rooms,
building, or
underground
Under water High-voltage
wires or
television
towers
Construction
sites and heavy
Step 5: Ride Your Bike with Neostrack
Free ride:•
In meter view, measurement starts and stops automatically in sync with the movement
of the bicycle.
Start an exercise and record your data:•
In meter view, press
to start recording, press to pause, press again to stop.
NOTE:
To improve the GPS accuracy, you can set 1 sec mode as your recording
noitcnuf )NALW( cnyS gnisu yb ylraluger SPG etadpu dna ) 52 egap ( ycneuqerf
( page 6 ) to update GPS data.
NOTE: If you continue to proceed without pressing to record, your Neostrack computer
will ask you if you want to record when it detects motion. To set the frequency of start
reminder please go to page 27.
Step 2: Turn On Neostrack
Press to turn on the device.
Step 3: Initial Setup
Follow the instructions to complete setup.
wizard
1. Select the display language.
2. Select the unit of measurement.
NOTE: Only when you choose English for the display language, will you need to select the
unit of measurement. Otherwise, default would be metric unit.
To Next Page
Loading...
