Gibertini E50S/3 - 7.8 Animal

Semi
-
micro balance Mod. E50S/3
Page 24 of 38
Retrieve the parameters:
Display
Key
Step
+ 8,58962 g
TOTAL 8,58962 g
«»
Show the info display.
Display the total of the added components.
+ 8,58962 g
RES. CAP. 396,41038 g
«»
Display the remaining capacity.
+ 8,58962 g
1= 3,4770 g
«»
Display the individual components.
+ 8,58962 g
STO
2 RES INF
«esc»
Exit the info display.
Clear the measurements:
Display
Key
Step
+ 8,58962 g
STO 2 RES INF
«»
Hold down the key until the acoustic signal sounds and
the component counter is reset.
+ 8,58962 g
STO 0 RES INF
Measurements cleared, balance is ready for a new
measurement.
A measurement log is printed by pressing the «PRINT» key.
7.8 Animal

SETUP APPLICATION
ANIM
AL
MEASURETIME 4
Enter time in seconds.
With the aid of the “ANIMAL” program you can weigh live animals accurately, even if they move on the
weighing pan.
The balance measures continuously throughout the period defined by the user in the Setup menu, averages
the stored values at the end of the measuring period and displays average-measurement thus obtained.
Assignment of the function keys:
Key
Function
«
MAN
» Manual release of the measurement.
«
AUTO
» Automatic release of the measurement with a second delay after each load change.
«
STO
» Statistics storage function if activated.
Display
Key
Step
+ 3,4770 g
ANIMAL
«»
Press until “ANIMAL” appears.
+ 3,4770 g
MAN AUTO
«»
Manual release of the measurement.
+ 3,4770 g
MAN AUTO
«»
Automatic release of the measurement with a second
delay after each load change.
 + 3,4770 g
MAN AUTO STO
Display the measurement result; the small circle in the
display is active.
+ 3,4770 g
MAN AUTO STO
«»
Statistics storage function if activated.
The measurement result is printed by pressing the «PRINT» key.