Gibertini E50S/3 - Check-Weighing; SET CHECK +;-

Semi-micro balance Mod. E50S/3
Page 27 of 38
9 Check-Weighing

SET CHECK +/
-
CHECK +/
-
MODE ON/OFF
Switch application on/off.
NOM. 100.000 g
Enter nominal weight.
TO 120.000 g
Define over
limit.
TU 80.000 g
Define under limit.
With the aid of the “CHECK +/-“ program you can check each measurement for its agreement with a defined
reference-value plus/minus allowable deviations.
 The four function keys are not active.
 In the display “+”, “-“ and “II” are active.
If “II” lights up, the measured value lies within the specified tolerances.
Display
Key
Step
+ 0,0000 g
CHECK +/
-
«»
Press until “CHECK +/-“ appears.
The check application is activated.