micro balance Mod. E50S/3
Page 32 of 38
11.2.1 Examples for the remote control
Description of the function executed
D . . . . . Five dashes are displayd
DTEST123 tESt123 is displayd
D The display is dark
T100 -100.000 g (Tare set to 100 g)
T1 -1.000 g (Tare set to 1g)
T Balance is tared
12 Service
12.1 Maintenance and servicing
The balance must be treated carefully and cleaned regularly. It is a precision instrument.
Regularly dismantle the weighing pan and the weighing pan holder and remove any dirt or dust from under
the weighing pan and on the balance housing with a soft brush or a soft, lint-free cloth, moistened with a
mild soap solution.
The weighing pan and the holder can be cleaned under running water. Take care that both parts are
completely dry before they are re-installed on the balance.
CAUTION
Never use solvents, acids, alkalis, paint thinners, scouring powders or other aggressive or corrosive
chemicals for cleaning, since these substances attack the surfaces of the balance housing and can
cause damage.
The regular maintenance of the balance by your GIBERTINI Service Representative will guarantee unlimited
function and reliability over many years and will extend the life span of the balance.
12.2 Error messages
The balance shows a description of the fault in the info-line.
NOTE
If an error occurs without a description of the error in the info-line, a GIBERTINI Service Engineer
must be called.
To Next Page
Loading...