EasyManua.ls Logo

Gigaset IP BASE - Call Divert Rule Management; Activating;Deactivating Diverts; Creating New Divert Rules

Gigaset IP BASE
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gigaset IP BASE / SBG IE-UK-International en / A31008-M3037-S301-1-X119 / telephony_SBG.fm / 3/12/24
Template Module, Version 2.2, 15.11.2022 / Version - 07.07.2020
Call diverts
19
Activating/deactivating and editing call divert
Settings Telephony Call diverts next to a device or connection, click
activate/deactivate required call forwarding (Always / When busy / When no answer) with
switch ( = activated) if necessary, change Target and/or corresponding number
Save
Setting up call divert rules
You can set up call divert rules for multiple devices and connections. If a call forwarding rule is
active, an incoming call is immediately handled in accordance with the rule and is no longer
forwarded to the affected devices.
Settings Telephony Call diverts . . . the rules set up are listed under Call divert
rules
Set up new rule: Add rule
or: Wizards Call divert rule
. . . the wizard for setting up call divert rules is started follow the instructions in the wizard
Specify name and mode for the rule
In mode Scheduled: Set schedule
Specify times at which the rules are to apply via the time lines
or: Click +Time and select the times for each day
Drag devices and connections (numbers) to which this rule is to apply from the list Available
devices and connections list up into the Active devices and connections list
Specify mode and destination for the call divert
Name Name for the rule under which it is to be displayed in the list
Mode How is the rule to be activated?
Scheduled The call divert is switched on and off automatically at specified
times.
Manual The call divert is switched on and off manually if necessary.
Announcement &
target The caller hears an announcement and is then diverted to a number.
Select required announcement from the list
Select name/internal number of a telephony device, call group or
answering machine or enter External phone number
Announcement The caller hears an announcement, then the connection is ended.
Select required announcement from the list
Target The call is diverted to an internal or external number.
Select name/internal number of a telephony device, call group or
answering machine or enter External phone number

Related product manuals