Template Module, Version 2.2, 15.11.2022 / Version - 07.07.2020
VoIP profile
Gigaset IP BASE / SBG IE-UK-International en / A31008-M3037-S301-1-X119 / settings_advanced.fm / 3/12/24
48
VoIP profile
When setting up connections, you can choose from various provider profiles where the
provider-specific settings are preset.
Make sure that the profiles are updated automatically if anything changes in the settings.
On the web interface
Settings System VoIP profile activate/deactivate function with the switch
( = activated)
Network
Local network (LAN)
The telephone is automatically integrated into the local network by default. You connect the
telephone to the network (e.g. via a router), the IP address is assigned automatically and the
other network settings are transferred over.
If you need a different configuration for your network, do it manually.
On the web interface
Settings Network LAN LAN interface
Setting the network configuration manually
IP address type Select Static
IP address
Enter the required IP address
It must be in the valid address range of the standard gateway and
the subnet mask used.
Subnet mask
Enter subnet mask used in the network
The subnet mask specifies how many parts of the IP address are used
for addressing the telephone and how many for the network.
Standard gateway
Enter the IP address of the standard gateway
This is usually a router or switch in the network.
Preferred DNS server
Enter the IP address of the DNS server used on the network
The DNS server assigns device names to IP addresses.
Alternative DNS server Optional (only on the web interface):
Enter the IP address of a second DNS server used on the network
To Next Page
Loading...
