Gigaset IP BASE - Advanced Settings - Call Handling; Call Area and Country Codes

Gigaset IP BASE / SBG IE-UK-International en / A31008-M3037-S301-1-X119 / settings_advanced.fm / 3/12/24
Template Module, Version 2.2, 15.11.2022 / Version - 07.07.2020
Making/receiving calls
43
Advanced settings
Making/receiving calls
Area and country codes
When making landline calls, you may also need to dial the area code for local calls (depending
on the provider). Specify that the area code is automatically preselected for all VoIP calls in the
same local area and also for national long-distance calls. This means that the area code is set
before all numbers that do not begin with 0 – even when dialling numbers from the directory
and from other lists.
On the web interface
 Settings Telephony Number handling Area codes
 From the selection list, select the country where the phone is being used . . . the international
and national area code is then entered in the Prefix and Area Code fields
International
Example "United Kingdom" Prefix = 00, Area Code =44
National
Example "London" Prefix =0, Area Code = 207
Save settings: Save
Prefix Prefix for the international dialling code. Value: max. 4 digits, 0-9
Area Code International dialling code. Value: max. 4 digits, 0-9
Prefix Prefix for the area code. Value: max. 4 digits, 0-9. These digits are prefixed to the
area code for national long distance calls.
National Area code for your location (depending on country/provider).
Value: max. 8 digits, 0-9