Gigaset IP BASE - DECT Network Operations; Locating Handsets and Setting PIN; Connecting DECT Repeaters

Template Module, Version 2.2, 15.11.2022 / Version - 07.07.2020
Expanding the DECT network
Gigaset IP BASE / SBG IE-UK-International en / A31008-M3037-S301-1-X119 / applications_SBG.fm / 3/12/24
34
Locating a handset (paging)
 Briefly press the registration/paging key on the base station.
All handsets will ring at the same time ("paging"), even if ringtones are switched off. Exception:
handset on which the baby monitor is activated.
Ending the search
 Briefly press the registration/paging key on the base station
or press the Talk key on the handset
or no action. The paging call will end automatically after a while.
Setting the registration PIN
The registration PIN must be entered on the handset or repeater during the registration process
(preset: 0000). You can change the registration PIN.
On the web interface
 Settings Telephony Advanced settings DECT settings
 Enter the four-digit registration PIN in the text field
Save settings: Save
Connecting DECT repeaters
A repeater increases the reception range of the Gigaset handsets with the base. You can register
up to two Gigaset Repeater HX units.
More information on the Gigaset Repeater HX units is available from the repeater user guide and
online at www.gigaset.com
.
On the web interface
 Settings Te le pho ny Phone devices Add DECT Repeater HX ... the wizard
DECT repeater is started follow the instructions in the wizard
If required, you can change the name of the repeater set up.
When the repeater has been registered successfully, the left-hand LED on the repeater
will be continuously lit. Detailed information on the registration procedure on the
repeater:
user guide for your repeater