Gigaset SL400A - Redial List; Incoming SMS Message List; Answering Machine List (Gigaset SL400 A Only); Call Lists

42
Using the directory and lists
Gigaset SL400-SL400A / EN for IM-Nord / A31008-M2103-R201-3-SM19 / direct_charges.fm / 01.02.2011
Version 4, 16.09.2005
Redial list
The redial list contains the twenty numbers
last dialled with the handset (max. 32 digits).
If one of the numbers is in the directory, the
corresponding name is displayed.
Manual redial
c Press the key briefly.
s Select entry.
c Press the talk key again. The
number is dialled.
When a name is displayed, you can display
the corresponding phone number by press-
ing the display key
§View§.
Managing entries in the redial list
c Press the key briefly.
s Select entry.
§Options§ Open menu.
The following functions can be selected with
q:
Copy to Directory
Copy an entry to the directory (page 38).
Automatic Redial
The selected number is automatically
dialled at fixed intervals (at least every 20
seconds). The talk key c flashes; "open
listening" is activated.
– Party answers:
Press the talk key c. The function
is terminated.
– Party does not answer:
The call is terminated after approx.
30 seconds.
The function is terminated after pressing any
key or after ten unsuccessful attempts.
Display Number (as in the directory,
page 39)
Delete Entry (as in the directory, page 39)
Delete All (as in the directory, page 39)
Incoming SMS message list
All received SMS messages are saved in the
incoming message list (
¢ page 47).
Answering machine list
(Gigaset SL400A only)
You can use the answering machine list to
listen to the messages that are on the
answering machine.
Call lists
Prerequisite: Calling Line Identification
Presentation (CLIP, page 31)
Your telephone stores various types of calls:
u Outgoing calls ( š)
u Accepted calls ( ›)
u Missed calls ( ™)
u Calls recorded by the answering machine
(Ã, Gigaset SL400A only)
You can view each type of call separately or
gain an overview of all calls. Each call record
contains the last 20 numbers in its category.
When in idle state, open the call lists by
selecting the
§Calls§ display key or via the
menu:
v
¢
Ê