Gigaset SL400A - Using Multiple Handsets; Call Transfer and Multi-Party Calls

64
Using multiple handsets
Gigaset SL400-SL400A / EN for IM-Nord / A31008-M2103-R201-3-SM19 / registr_sett.fm / 01.02.2011
Version 4, 16.09.2005
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows.
De-registering handsets
You can de-egister all other registered hand-
sets from each of the registered Gigaset
handsets.
v
¢
Ï
¢ Registration
¢ De-reg. Handset
s Select the internal subscriber
you wish to de-register and
press
§OK§.
(The handset you are currently
using is highlighted with <).
~ Enter the current system PIN
and press
§OK§.
§Yes§ Press the display key.
Locating a handset ("Paging")
You can locate your handset using the base.
¤ Briefly press the registration/paging but-
ton on the base (
¢ page 2).
¤ All handsets will ring simultaneously
("paging"), even if the ringtones are deac-
tivated.
Ending paging
¤ Briefly press the registration/paging but-
ton on the base or press the talk key c
on the handset.
Changing the base
If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
v
¢
Ï
¢ Registration ¢ Select Base
s Select one of the registered
bases or Best Base and press
§Select§.
Making internal calls
Internal calls to other handsets registered on
the same base are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the hand-
set.
Or:
s Select handset.
c Press the talk key.
Calling all handsets ("group call")
u Press and hold.
Or:
u Initiate internal call.
* Press the star key.
or
Call All Select
c Press the talk key.
All handsets are called.
Ending a call
a Press the end call key.
1) On the handset
¤ Start to register the handset as
described in its user guide.
2) On the base
¤ Press and hold the registration/paging
button on the base (
¢ page 2)
(approx. 3 sec.).