79
Connecting the base to the PABX
Gigaset SL400-SL400A / EN for IM-Nord / A31008-M2103-R201-3-SM19 / pabx.fm / 01.02.2011
Version 4, 16.09.2005
Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Selecting recall
The current setting is indicated by Ø.
Setting recall
Your phone is preset at the factory for oper-
ation on the main connection. For operation
on a PABX, you may have to change this
value. Please refer to the user guide for your
PABX .
v
¢
Ï
¢ Telephony ¢ Recall
s Select recall and
press
§Select§
(
Ø = set value). Possible values
are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 400 ms, 600 ms,
800 ms.
Saving an access code
(outside line code)
Prerequisite: You may have to enter an
access code in front of the number for exter-
nal calls in your PABX, e.g., "0".
v
¢
Ï
¢ Telephony ¢Access Code
~ Enter or change access code,
max. 3 digits.
§Save§ Press the display key.
If an access code has been saved:
u The access code is automatically prefixed
when dialling using the call lists, answer-
ing machine list and when dialling the
numbers of the SMS centres you have
entered.
u The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick dial
numbers or SMS centre numbers.
u If you copy the recipient's number from
the directory when sending an SMS, you
have to delete the access code.
u An existing access code is deleted
using Ñ.
To Next Page
Loading...
