Gigaset SL400A - Defining Handset Settings; Ringtones and Alert Settings

72
Defining handset settings
Gigaset SL400-SL400A / EN for IM-Nord / A31008-M2103-R201-3-SM19 / registr_sett.fm / 01.02.2011
Version 4, 16.09.2005
Selection:
Select screensaver or
§View§ Press the display key. The active
screensaver is displayed.
s Select screensaver and press
§OK§.
§Save§ Press the display key.
Briefly press the end call key a to return
to the idle display.
Setting large font
You can increase the font size of print and
symbols in call lists and the directory to
improve readability. Only one entry is shown
at a time on the display instead of several
entries and names are abbreviated if neces-
sary.
v
¢
Ï
¢ Display + Keypad
¢ Large Font
§Change§ Press display key (³=on).
Setting the colour scheme
You can set the display to be shown in vari-
ous colour combinations.
v
¢
Ï
¢ Display + Keypad
¢ Colour Schemes
Select Colour Scheme (1 to 5) and press
§Select§.
Setting the display backlight
Depending on whether or not the handset is
in the charger, you can activate or deactivate
the backlight. If it is activated, the display is
permanently dimmed.
If the display backlight is deactivated, it can
be reactivated by pressing any key. Digit
keys appear on the display for pre-dialling;
all other keys do not have any further func-
tions.
v
¢
Ï
¢ Display + Keypad
¢ Display Backlight
The current setting is displayed.
¤ You can enter data in the following fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
§Save§ Press the display key.
Setting keypad illumination
The brightness of the keypad illumination
can be set to one of five levels.
v
¢
Ï
¢ Display + Keypad
¢ Keypad Illumination
The current setting is displayed.
¤ You can enter data in the following fields:
Brightness:
Select 1 (darkest) to 5 (brightest).
§Save§ Press the display key.
Activating/deactivating
auto answer
If this function is activated, you can simply
lift the handset out of the charger without
having to press the talk key c when you
receive a call.
v
¢
Ï
¢ Telephony ¢Auto Answer
§Change§ Press display key (³=on).
Please note
If the analogue clock has been set as the
screensaver, the second hand is shown
only when the handset is in the base.
•
Please note
With the On setting, the standby time
of the handset can be significantly
reduced.
•