Gigaset SL400A - Changing the Handsfree;Earpiece Volume; Setting a Handsfree Profile

73
Defining handset settings
Gigaset SL400-SL400A / EN for IM-Nord / A31008-M2103-R201-3-SM19 / registr_sett.fm / 01.02.2011
Version 4, 16.09.2005
Changing the handsfree/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
In idle state:
t Open the menu for setting the
call volume.
r Set the earpiece volume.
s Scroll to the Speaker line.
r Set the handsfree volume.
§Save§ Press the display key to save the
setting.
During a conversation via the earpiece or in
handsfree mode:
t Press the control key to call up
the Handset Volume menu. Set
the earpiece or handsfree vol-
ume by pressing r.
The setting will automatically be saved after
approximately 3 seconds, if not then press
the display key
§Save§.
If t is assigned to another function, e.g., call
swap (
¢ page 37):
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Setting a handsfree profile
You can set different handsfree profiles to
optimally adapt your phone to your environ-
ment.
Profile 1
The optimum setting for most connec-
tions and set as default.
Profile 2
Optimum volume in handsfree mode.
However, this means that the participants
cannot speak at the same time as the per-
son speaking is given preferential trans-
mission (making two-way conversations
difficult).
Profile 3
Optimises two-way conversations, both
callers can hear each other, even if they
talk at the same time.
Profile 4
Optimised for special connections. If the
default setting (profile 1) does not pro-
vide optimum sound, please give this a
try.
In idle status:
v
¢
Ï
¢ Audio Settings
¢ Handsfree Profiles
q Select handsfree profile (1 to 4).
§Select§ Press the display key to save the
setting.
During a conversation:
§Options§ Open menu.
Handsfree Profiles
Select and press
§OK§ .
q Select handsfree profile (1 to 4).
§Select§ Press the display key to save the
setting.
Please note
u The settings for the earpiece also
apply to a connected headset.
u You can also set the call volume using
the menu (
¢ page 28).