Chapter 1
CHAPTER 1 | INTRODUCTION
Gilson’s MINIPULS® 3 Peristaltic Pump was specifically designed
to meet process laboratory liquid handling needs. The MINIPULS 3
combines microprocessor speed control with a high-torque stepper
motor. Chemical-resistant pump heads, equipped with five or ten
stainless steel rollers, set the performance standard in producing
smooth, low-pulse flow and reproducible flow rates at higher
pressures.
This user’s guide describes how to set up and operate a MINIPULS 3.
It also describes some of the methodology required to obtain
accurate reproducible results.
IN THIS CHAPTER
• Unpacking on page 10
• Customer Service on page 10
• Description on page 11
• Speed Control Module on page 12
• Pump Head with Safety Cover on page 15
9
MINIPULS® 3 PERISTALTIC PUMP | USER'S GUIDE
To Next Page
