Chapter 3
Chapter 3 | OperatION
Install the pump and make the required hydraulic and electrical
connections. Refer to Chapter 2 | Setup.
Switch the pump on using the rear-panel switch.
Then refer to the following sections, which describe how to use the
keypad to control the pump, or to Chapter 4 | Remote Control if the
pump is to be controlled remotely.
IN THIS CHAPTER
• Keypad Functions on page 42
• Initialization on page 44
• Autostart Function on page 46
• Changing the Unit ID on page 48
• Routine Maintenance on page 48
• Troubleshooting on page 49
• Repair and Return Policies on page 50
41
MINIPULS® 3 PERISTALTIC PUMP | USER'S GUIDE
To Next Page
