Returning the Seats to an Upright Position
To
return the seat@)
to
the upright position, do the
following:
1.
Return the seat
to
the floor pins by rotating the seat
down
to
reengage the seat hooks.
2.
Try
to
raise the seat
to
check that it is locked down.
3.
Pull the seat back up
to
return
it
to
the upright
position.
Entry/Exit to/from the Third Row Seat
To enter the third row seat, you must fold and tumble
the second row seat following the instructions given
previously.
If you are exiting the third row with no assistance,
do the following.
1.
Pull the handle on the center of the second row
seatback down
to
release and fold the seatback.
2. Reach around
to
the side of the second row seat
and pull the back
of
the seat lever up
to
tumble
the entire seat.
Be sure
to
return the seat
to
the passenger position
when you are finished. Never use the third row seat
as a seating position while the second row is folded
and tumbled.
Folding the Third Row Seats
1.
Pull up on the handle located on the bottom of the
seat cushion
to
release the seat cushion.
2.
Lift up the seat, and then pull it forward.
3.
Fold the seatback forward until it is flat.
4. Unhook the elastic loop on the back
of
the seatback.
5. Fold the panel located on the back of the seatback
to make a flat surface.
Returning the Seat(s) to an Upright
Position
To
return the seat to its original position, reverse the
steps listed in folding the third row seats.
1-8
To Next Page
Loading...
