DVD
Messages
The following errors may be displayed:
e
e
a
Disc Format Error: This message will be displayed
if
a disc is inserted upside down,
if
the disc is not
able
to be read or
if
the disc format is not
compatible.
Disc Play Error: This message will be displayed
if
the mechanism can not play the disc. Severely
scratched discs will cause this error.
Region Code Error: This message will be
displayed for all non Region
1
discs
(DVDs
sold
outside of North America).
Load/Eject Error: This message will be displayed
if
the disc is not properly lined up in the mechanism.
Disc Not Present: This message will be displayed
if
the
PLAY,
EJECT
or
DVD
AUX
buttons are
pressed and no disc
is
in the player.
Remote
Control
To
use the remote control, aim it at the small square
window
to
the left of the disc slot and press the desired
button. Direct sunlight or very bright light may affect
the ability of the entertainment system
to
receive signals
from the remote control. Be sure the remote’s batteries
are not discharged, as this will also affect the function
of the remote control. Objects blocking the line of sight
may also affect the function of the remote control.
Notice:
Do not store the remote control in heat
or direct sunlight. This could damage the remote
control and would not be covered by your warranty.
Keep the remote control stored in a cool,
dry place.
3-97
To Next Page
Loading...
