3. Pull the assembly away from the vehicle.
7. Push the new bulb into the socket
8.
Reinstall the socket and screws.
9.
Reconnect the wiring harness.
IO.
Reinstall the lamp assembly and ti
11.
Close the liftgate.
Replacement
Bulbs
mtil it clicks.
hten the screws.
Exterior Lamp
I
Bulb Number
4. Unclip the wiring harness
(A)
and remove the three
5.
Remove the socket by releasing the retaining tabs.
6.
Holding the socket, pull the bulb to release it
socket retaining screws (B).
from the socket.
Low Beam
High Beam 9005 HB3
Front Sidemarker Lamps
Rear Turn Signal Lamps
3057
Tail and Stoplamps
3457
Front Turn Signal Lamps
1
94
For any bulb not listed here, contact your dealer.
3057
5-52
To Next Page
Loading...
