6-h
RTN
(Return):
When a DVD menu is active and
this button is pressed, the selected option will be
disabled. This button could have different functions with
different discs.
tal
SCREEN BRIGHTNESS: Press the plus
or
the
minus symbol
to
increase or
to
decrease the brightness
of
the screen. This button can also be found on the
video screen.
-:q-
LIGHT: Press this button
to
illuminate the keypad
for about eight seconds.
Setup Menu
To access the setup menu, ensure a DVD is in the
player and the video is in stop mode. Press the menu
key. Once the menu is activated, use the UP, DOWN,
RIGHT, LEFT, and Enter buttons
to
navigate the screen.
The setup menu allows the use
to
select default
preferences for Menu Language, Subtitle Language,
Audio Language, TV Aspect, TV Mode, and Dynamic
Range Compression.
Not
all DVDs support all the feature defaults in the setup
menus. In the event a particular feature is not supported,
defaults will be provided by the DVD media.
Exit the setup menu by pressing the RETURN button on
the remote control. If you make changes
to the system
setup defaults, the disc will resume play from the
beginning and not where it previously left
off.
Battery Replacement
To
change the batteries, do the following:
1.
Unclip the battery door located on the back of the
remote control.
2. Replace the two AAA batteries in the compartment.
Make sure that they are installed correctly.
3. Close the battery door securely.
If the remote control is to be stored for a long period of
time, remove the batteries and keep them in
a
cool,
dry place.
3-
1
00
To Next Page
Loading...
