GMC 2003 Envoy XL - Securing a Child Restraint Designed for the LATCH System; Securing a Child Restraint in a Rear Outside Seat Position

Securing a Child Restraint Designed
for the LATCH System
1.
2.
3.
4.
5.
Find the anchors for the seating position you want
to use, where the bottom
of the seatback meets the
back
of the seat cushion.
Put the child restraint on the seat.
Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
If the child restraint is forward-facing, attach the top
strap to the top strap anchor. See Top Strap
on
page 1-40. Tighten the top strap according to
the child restraint instructions.
Push and pull the child restraint in different
directions
to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect
the anchor points.
Securing a Child Restraint in a Rear
Outside Seat Position
If your child restraint is equipped with the LATCH system,
see
Lower Anchorages and Top Tethers for Children
(LA TCH System) on page 1-42.
1 -44